Protomop

PROTOMOP 10, 16 & 22 MICROFIBER MOP

MATERIAL: 70% Polyester/30% Polyamide Microfiber Yarn

CONSTRUCTION: Looped Ends, Sewn Headband and Sewn Tailband.

QUALITIES: 10:1 Absorbency Ratio, Mildew Resistant, Autoclavable (approximate 30% shrinkage), Can Be Irradiated, Non-Linting, Mechanical Cleaning action of Microfiber enhances particle collection, High Chemical Tolerance, Leaves less liquid on surface than other mops, Quick Absorbency, Long life.

A Microfiber yarn mop, Available in:

* PROTOMOP 10 (Yellow Band 10oz.)

* PROTMOP 16 (Blue Band 16 oz.)

* PROTOMOP 22 (Red Band 22 oz.) 

ADVANTAGES OF MICROFIBER MOPS OVER EXISTING MOPS:

• Retains standard head band/tail band mop construction but replaces cotton or poly yarn with microfiber yarn, a new material on the American market.
• No “break-in” period. Ready to use immediately.
• More absorbent – this means fewer trips to the mop bucket.
• Better particle pick up due to the 1,000’s of ‘tiny fingers” – cleans better than present mops.
• Lighter – our 16 oz microfiber mop will pick up more water than a 24 oz cotton mop
• Glides on the floor, less torque than cotton mops - fewer injuries
• Leaves the floor drier – this means safer floors.
• Non-Linting.
• Quick change of mop refills.
• High tolerance to cleaning chemicals.
• “GREEN” product as it cleans without chemicals and may be laundered 200 plus times.
• Anti-microbial construction.
• No smell – won’t go sour. 

This mop may also be irradiated and autoclaved for the industries concerned with viable particles. 

CLEANROOM CLEANING AGENTS AND MOP COMPARISON CHARTS

The Table below shows the effectiveness of PROTOGREEN^TM detergent compared to 12 Megohm DI water and a 70% Isopropyl Alcohol (IPA) and 30% 12 Megohm DI water.   Protogreen Cleanroom Surface Cleaner is as effective as or more effective than DI water or the IPA mixture. The average number of particles before testing were 463 @ 0.5 microns and larger and 80 @ 5.0 microns and larger. 

The table below shows the effectiveness of PROTOMOP^TM cleanroom microfiber floor mop compared to a spun polycell cleanroom mop and a 100% polyester cleanroom mop.

The microfiber mop left a surface cleaner by at least 1/2 magnitude than the other two mops sampled.   The average number of particles before testing were 463 @ 0.5 micronsand larger and 80 @ 5.0 microns and larger.