Loading... Please wait...

Construction Cleaning

CLEANING

By using the PROTOCLEAN documented cleaning systems you will see results of 2 to 10 times cleaner for particulate matter at 0.5 micron size and larger.

 moppers-only.jpg

The continuous cleaning is performed in the cleanroom zones, interstitial and sub-fab levels. The cleaning personnel are trained in this type of work and understand the different Protocol levels.

 

PROTOCLEAN has been and continues to perform testing cleanliness levels before and after cleaning by scientific methods since the company was founded. Over the years, PROTOCLEAN has accumulated hundred’s of tests showing how our cleaning crew is performing, and more importantly, how much cleaner we get solid surfaces and air counts than our competitors before us.

CLEANING VERIFICATION

When it comes to non-viable particles, test methods are identified in ISO 14644-9– Classification of Surface Particle Cleanliness. There are different procedures for determining direct methods as opposed to in-direct methods of surface contamination in a cleanroom. Among them are microbial monitoring, fall-out counts, UV light testing, scanning electron microscopes, witness plates, tape methods and scanning camera surface particle detectors to name a few and Indirect Methods such as flushing, which may not be as accurate.

For viable particles, Microbial monitoring is an effective ways to measure for molds, bacteria and yeasts on surfaces and air. Contact Plates and Bio-Air Sampling units are used for sampling.

PROTOCLEAN uses the QIII surface particle detector counter to determine the number of particles on surfaces before cleaning start up, after cleaning using PROTOCLEAN’s cleaning systems, cumulative effects of cleaning using PROTOCLEAN’s cleaning systems and surface count load between cleanings. 

A meeting with the customer to come up with agreed upon test locations and validated studies are the first step to using contamination mapping to develop a certified cleaning program.

In general, PROTOCLEAN and the customer will meet and set up a program that identifies count locations and which solid surfaces will be counted daily or more often, every-other day, twice a week and weekly or any other agreed upon time frames. Cleaning technicians clean according to the documented program listed on a cleaning log.

The data from the cleaning and testing is then logged into an excel spreadsheet and may be used to determine cleaning frequencies.  

Not all companies need to perform contamination mapping. PROTOCLEAN has performed it’s own contamination mapping which has allowed PROTOCLEAN to put together a standard cleaning program that may be used at many customer locations.

RESULTS

PROTOCLEAN has had such success with their cleaning systems they are confident in reporting that by performing a super-clean, construction clean, top-down or triple clean, air particle counts will decrease any where from 2 to 10 times and microbial counts by 2 to 15 times.  

In all the scientific testing below PROTOCLEAN was hired to replace a competitor.

cleaning-surface-results.jpg

 

Sign up to our newsletter